Difference between QoS and HQoS with configuration level

[s76602061]

Please teach what is difference between QoS and HQoS with configuration level.

Below site explains that the definition of QoS and HQoS but there is no example

of configuration. Please teach if you have information.

https://supportforums.cisco.com/sites/default/files/legacy/5/9/1/15376195-ISR_G2_Perfomance.pdf

QoS
When testing QoS, packets are marked for classification
by the packet generator, and the router under test
classifies the packets based on the markings.

H-QoS
HQoS uses a parent policy, usually a bandwidth shaper,
and subsequent child policies to color and queue
traffic within the parent policy.      

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

policy-map child

class x

priority percent 30

class y

bandwidth remaining percent 60

class class-default

bandwidth remaining percent 40

policy-map parent

class class-default

service-policy child

shape average #

interface x

service-policy output parent

The parent policy shapes the traffic at some rate and the child policy determine how queued shaped traffic is processed.

[s76602061]

Thank you for your comment

[gettofayoyiwajide]

Sorry Joseph, am not getting your explanation ditto the question

[Joseph W. Doherty]

Okay, what part of "Below site explains that the definition of QoS and HQoS but there is no example of configuration." don't you understand?  I believe the request is for a sample configuration, agree?

If not, how do you understand OP?

I provided an example of a HQoS policy implemented on an interface.  Certainly possible, I didn't provide enough explanatory remarks.