04-25-2011 07:41 AM - edited 03-04-2019 12:10 PM
I see differrent voltage in line card ws-6704.
Iam afraid of something went wrong with my 6500 switch. two 6500 switch is redundant.
Pls help me.
04-25-2011 10:39 AM
could you help me?
04-25-2011 11:21 AM
Hello Duyendaica,
the two WS-6704 are powered at same voltage 42 V (@42V in the title) they are drawing a different electrical current (7.03 Ampere versus 8.98 Ampere) as a result of this they are using a different amount of power.
How many 10GE ports are active in each module?
With what optics are equipped the different ports?
if you make a show module and you compare the hardware revision are they the same or not?
Are the uptimes of the two chassis comparable ?
Hope to help
Giuseppe
04-26-2011 07:52 AM
hi Giuseppe,
I can see they use the same number of interface and same hardware revision
about up time:
Switch 1: Core-6509-01 switched to active is 2 weeks, 3 days, 9 hours, 45 minutes
Switch 2: Core-6509-02 switched to active is 2 weeks, 3 days, 9 hours, 52 minutes
here the detail:
------------------------show module switch 1
show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL1336Y1U0
2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL134328MX
6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL1335X9CB
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0023.ebf1.c19c to 0023.ebf1.c19f 2.9 12.2(14r)S5 12.2(18)SXF1 Ok
2 0026.993b.7288 to 0026.993b.7297 4.7 7.2(1) 8.5(0.46)RFW Ok
6 0024.1499.65b8 to 0024.1499.65bb 5.9 8.5(3) 12.2(18)SXF1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6700-DFC3B SAL1337Y8T3 4.8 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1335X819 1.11 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL1335X7QN 4.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
6 Pass
------------------------show module switch 2
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL1336Y1TM
2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL134328KU
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL1336XUQD
6 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL SAL09306EH9
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0023.ebf1.c184 to 0023.ebf1.c187 2.9 12.2(14r)S5 12.2(18)SXF1 Ok
2 0026.993b.7278 to 0026.993b.7287 4.7 7.2(1) 8.5(0.46)RFW Ok
5 001f.6c77.57a4 to 001f.6c77.57a7 5.9 8.5(3) 12.2(18)SXF1 Ok
6 0014.a97d.a114 to 0014.a97d.a117 4.6 8.5(3) 12.2(18)SXF1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL1336Y31S 4.1 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1332VMZ0 1.11 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL1336XRT2 4.0 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL09306EGH 1.10 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL09306CRB 2.9 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
5 Pass
6 Pass
==============================show int status switch 1
show int status
Port Name Status Vlan Duplex Speed Type
Te1/1 connect to 21-DIS- connected routed full 10G 10Gbase-SR
Te1/2 connect to 21-DIS- notconnect 1 full 10G 10Gbase-SR
Te1/3 connect to 21-DC-6 connected routed full 10G 10Gbase-SR
Te1/4 connect to 21-DC-6 connected routed full 10G 10Gbase-SR
Gi2/1 connect to 21-SW-3 connected 201 full 1000 1000BaseSX
Gi2/2 connect to 21-SW-3 connected 201 full 1000 1000BaseSX
Gi2/3 notconnect 1 full 1000 1000BaseSX
Gi2/4 disabled 1 full 1000 1000BaseSX
Gi2/5 disabled 1 full 1000 1000BaseSX
Gi2/6 disabled 1 full 1000 1000BaseSX
Gi2/7 disabled 1 full 1000 1000BaseSX
Gi2/8 disabled 1 full 1000 1000BaseSX
Gi2/9 disabled 1 full 1000 1000BaseSX
Gi2/10 disabled 1 full 1000 1000BaseSX
Gi2/11 disabled 1 full 1000 No Transceiver
Gi2/12 disabled 1 full 1000 No Transceiver
Gi2/13 disabled 1 full 1000 No Transceiver
Gi2/14 disabled 1 full 1000 No Transceiver
Gi2/15 disabled 1 full 1000 No Transceiver
Gi2/16 disabled 1 full 1000 No Transceiver
Gi6/1 disabled 1 full 1000 No Transceiver
Gi6/2 disabled 1 full 1000 No Transceiver
====================show int status switch 2
show int status
Port Name Status Vlan Duplex Speed Type
Te1/1 connect to 21-DIS- connected routed full 10G 10Gbase-SR
Te1/2 connect to 21-DIS- connected routed full 10G 10Gbase-SR
Te1/3 connect to 21-DC-6 connected routed full 10G 10Gbase-SR
Te1/4 connect to 21-DC-6 connected routed full 10G 10Gbase-SR
Gi2/1 connect to 21-SW-3 connected 202 full 1000 1000BaseSX
Gi2/2 connect to 21-GW-3 connected 202 full 1000 1000BaseSX
Gi2/3 notconnect 1 full 1000 1000BaseSX
Gi2/4 notconnect 1 full 1000 1000BaseSX
Gi2/5 disabled 1 full 1000 1000BaseSX
Gi2/6 disabled 1 full 1000 1000BaseSX
Gi2/7 disabled 1 full 1000 1000BaseSX
Gi2/8 disabled 1 full 1000 1000BaseSX
Gi2/9 notconnect 1 full 1000 1000BaseSX
Gi2/10 disabled 1 full 1000 1000BaseSX
Gi2/11 disabled 1 full 1000 No Transceiver
Gi2/12 disabled 1 full 1000 No Transceiver
Gi2/13 disabled 1 full 1000 No Transceiver
Gi2/14 disabled 1 full 1000 No Transceiver
Gi2/15 disabled 1 full 1000 No Transceiver
Gi2/16 disabled 1 full 1000 No Transceiver
Gi5/1 disabled 1 full 1000 No Transceiver
Gi5/2 disabled 1 full 1000 No Transceiver
Gi6/1 disabled 1 full 1000 No Transceiver
Gi6/2 disabled 1 full 1000 No Transceiver
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide