I am trying to configure access from DMZ at one location to the DMZ at another location. I have a ASA5508 at location 1 and at location 2 we have an ISR C2900 that has our BGP configuration and a ASA5516 where the DMZ is configured. The office traffic can get there just fine with the tracert showing hops going from location 1 to BGP on the ISR at location 2 then directly to the DMZ on the ASA5516 at location 2.
The tracert from location 1 DMZ to location 2 DMZ stops at the BGP interface on the ISR. The ISR should know how to get to the DMZ at location 2 but stops???
