I tried below command.
Router#show bootvar
BOOT variable =
CONFIG_FILE variable does not exist
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
Router#
Router#
Router#show sup-bootdisk
-#- --length-- -----date/time------ path
1 80175620 May 22 2015 07:04:20 s72033-ipservicesk9_wan-mz.122-18.SXF16.bin
2 80465924 Jan 05 2000 21:52:38 s72033-ipservices_wan-mz.122-18.SXF8.bin
351412224 bytes available (160653312 bytes used)
Router#
Router#
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#$ sup-bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXF16.bin
Router(config)#do wr
Building configuration...
[OK]
Router(config)#end
00:04:22: %SYS-5-CONFIG_I: Configured from console by console
Router#show run
Building configuration...
Current configuration : 1143 bytes
!
upgrade fpd auto
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service counters max age 10
!
hostname Router
!
boot system sup-bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXF16.bin
!
no aaa new-model
ip subnet-zero
!
!
!
mls ip multicast flow-stat-timer 9
no mls flow ip
no mls flow ipv6
no mls acl tcam share-global
--More--
-----------------------------------------------------------------------------------------------------------------
After that,
Router#show bootvar
BOOT variable = sup-bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXF16.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
Router#
Router#show ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 08-Feb-06 13:31 by kellmill
Image text-base: 0x40021040, data-base: 0x42B48000
ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXE5, RELEASE SOFTWARE (fc1)
Router uptime is 7 minutes
Time since Router switched to active is 6 minutes
System returned to ROM by reload at 04:15:11 UTC Tue Jun 9 2015 (SP by reload)
System image file is "disk0:s72033-ipservicesk9-mz.122-18.SXE5.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6503-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory.
Processor board ID FOX095205V1
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface
2 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
Router#
-----------------------------------------------------------------------------------------------------------------
Router#relod
Router#reload
Proceed with reload? [confirm]
00:08:00: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
00:08:03: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:08:03: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
00:08:03: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:08:05: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
***
*** --- SHUTDOWN NOW ---
***
00:08:05: %SYS-SP-5-RELOAD: Reload requested
00:08:05: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
00:08:06: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot "
Read cis from dev 1 error (-6)device does not contain a valid magic number
boot: cannot open "bootflash:"
boot: cannot determine first file name on device "bootflash:"
System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
rommon 1 >
rommon 1 > set
PS1=rommon ! >
LOG_PREFIX_VERSION=1
SLOTCACHE=cards;
CRASHINFO=crashinfo_FAILED
RANDOM_NUM=552461918
?=0
TYFIB_BLOCK_ALLOC=
BSI=0
ACL_DENY=0
PF_REDUN_CRASH_COUNT=0
BOOT=bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXF16.bin,12;
RET_2_RTS=04:28:34 UTC Tue Jun 9 2015
RET_2_RCALTS=1433824113
rommon 2 >
again... rommon... why still entered rommon ㅠㅠah..
