12-15-2015 02:48 AM - edited 03-05-2019 02:56 AM
Hello everyone.
I have two ISP in branch office. Both connected through Cisco 881 router.
I looking config example which allow connect via SSH through primary and second ISP at the same time. i wanna ICMP and telnet too.
i think it is must be PBR.
Maybe someone can help me to decide this issue.
best regards, Alexey
Solved! Go to Solution.
12-15-2015 03:01 AM
Hey If both public ips are up and reachable on your 881 you should be able to ssh to either of them without any need for pbr. SSH just needs to be allowed on the router and setup as standard , then on your vty acl allow the host source your coming from.You should not use telnet across the internet only use ssh
12-15-2015 03:01 AM
Hey If both public ips are up and reachable on your 881 you should be able to ssh to either of them without any need for pbr. SSH just needs to be allowed on the router and setup as standard , then on your vty acl allow the host source your coming from.You should not use telnet across the internet only use ssh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide