10-04-2018 08:46 AM
I have a RV320 dual router and need to connect my Verizon Smart hub router as a fail over to my land line.
the smart hub signal is not recognized when I connect to to the WAN/DMZ or Wan.
10-04-2018 09:04 AM
Hello,
try both a standard straight cable and a crossover cable...
10-04-2018 10:32 AM
The Router is recognized when I connect it to one of the Lan Jacks in the back.. Not the WAN
10-04-2018 02:15 PM - edited 10-04-2018 02:18 PM
Hello,
do you have Smart Link Backup enabled for the interface (page 56 of the attached user guide) ?
https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv320/administration/guide/en/rv32x_ag_en.pdf
Also make sure you have the latest firmware installed (release 1.4.2.19)...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide