02-01-2016 07:18 AM - edited 03-05-2019 03:14 AM
Dear All,
I ordered EHWIC-4G-LTE-G for my 1941 Cisco router and I am facing the problem below.
I am getting the foloowing error... any ideas??? I have tried 3 different IOSs with no luck.
ATHGW#sh cellular 0/0/0 all
Warning: Mismatch detected between platform/module
and installed modem.Check system log for details
Hardware Information
====================
Modem Firmware Version = SWI9200X_03.05.29.02ap
Modem Firmware built = 2014/06/16 17:56:29
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) =
International Mobile Equipment Identity (IMEI) = 359470040417414
Integrated Circuit Card ID (ICCID) =
Mobile Subscriber Integrated Services
Digital Network-Number (MSISDN) =
Current Modem Temperature = 30 deg C
PRI SKU ID = 9903047, PRI version = 01.00
regards,
Panos
Solved! Go to Solution.
02-02-2016 01:00 AM
It should work on this release ios Release 15.3.3M5 MD
02-02-2016 01:00 AM
It should work on this release ios Release 15.3.3M5 MD
02-02-2016 06:44 AM
Thank you,
I used c1900-universalk9-mz.SPA.153-3.M6 and it worked perfectly!
regards,
Panos
02-02-2016 06:45 AM
ah great :)
10-22-2018 07:53 AM - edited 10-22-2018 08:00 AM
hi,
I received a ehwic-4g-lte-g to use with 1921 router. can you recommend IOS version to use please.
i keep getting below errors : Currently IOS is 15.6(3)M5
*Oct 22 14:52:41.687: UNKNOWN WIC_TYPE:0x0 detected.
*Oct 22 14:52:41.687: %CELLWAN-4-CELLULAR_MODEM_SKU_MISMATCH: Cellular0/0/0: Mismatch detected between installed modem MC7710[SKU ID ] on NIM SKU type EHWIC-4G-LTE-G. Expected modem for this SKU is MC7710[SKU ID 9901707]
*Oct 22 14:53:07.119: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
*Oct 22 14:53:07.119: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
*Oct 22 14:53:12.903: UNKNOWN WIC_TYPE:0x0 detected.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide