Hello Guys,
Currently my router doesn't detects the ehwic card and its currently working on hwic.
I just need to confirm if ehwic card supports T series IOS .
as per the below Cisco document it support min IOS 15.1.M series & I'm using 154-1.T1
appreciate if somebody can quickly confirm the same
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/qa_c67-660125.html
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/software/feature/guide/EHWIC_1_GE_SFP_CU_FM.html#wp1069000
please find my current IOS version & card type
Card is : EHWIC-1GE-SFP-CUV01
#Show version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(1)T1, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Feb-14 04:27 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Router uptime is 2 weeks, 3 days, 11 hours, 54 minutes
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.154-1.T1.bin"
Last reload type: Normal Reload
Last reload reason: power-on
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
