Hi,
i have a branch that is connected to the core network using TDM as a primary link and ISDN as a backup link. IPX must be running since there are novell servers located in the servers farm in the core network "Head Office".
I have configured IP EIGRP with AS 200 and IPX EIGRP with AS 250.
Everything works fine for a while according to the IPX since i can issue show ipx servers peridically not all the time. after few tests, it seems that IPX is triggering the ISDN link even the primary link is established and connected fine i don't know why?!
let us say sometimes i can issue show ipx servers and i can see all the IPX servers and sometimes i can see only LAN IPX servers only at the branch office.
interface serial 0/0/0
ip address 10.76.0.2 255.255.255.252
ipx network 10B
interface fastethernet 0/0
ip address 10.10.10.1 255.255.255.0
ipx network 10A
interface BRI 0/1/0
ip address ......
ipx network 10C
rourer eigrp 200
network 10
no auto-summaty
!
ipx router eigrp 250
network 10A
network 10B
network 10C
!
Any comments about this design and why the IPX traffic triggering the ISDN line even the primary is connected and working fine?
Another thing, i can't see the IPX EIGRP neighbors,why?
at the head office data aggregation router
interface 1/0:12
ip address 10.76.0.1 255.255.255.252
ipx network 10B
ipx router eigrp 250
ipx network 10B
Thanks in advance
Abd Alqader