When I update the distribute list under eigrp process, all eigrp neighbors reset. Is this normal? Here is the config and log messages:
router eigrp 1
distribute-list prefix Redistribute out TenGigabitEthernet1/1
distribute-list prefix Redistribute out TenGigabitEthernet1/2
distribute-list prefix Redistribute out Port-channel1
!
ip prefix-list Redistribute seq 10 permit 10.100.0.0/16
ip prefix-list Redistribute seq 20 permit 10.10.0.0/16
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.10.16.1 (Port-channel1) is resync: route configuration changed
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.10.16.1 (Port-channel1) is down: Interface Goodbye received
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.10.16.1 (Port-channel1) is up: new adjacency
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.100.1.234 (TenGigabitEthernet1/1) is resync: route configuration changed
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.100.1.234 (TenGigabitEthernet1/1) is down: stuck in active
%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 10.100.1.234 (TenGigabitEthernet1/1) is up: new adjacency
