Enabling ikev2 on cisco 4331

[jomo frank]

Hello Experts,

I have 4331 router but would like to use the vpn parameters found in IKEv2, and would welcome some guildance.

Regards

[balaji.bandi]

what kind of licese you have on that router ?

[jomo frank]

hello bb
The information for your guildance.

Technology Package License Information:

-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9

The current throughput level is 500000 kbps

Smart Licensing Status: Smart Licensing is DISABLED

cisco ISR4431/K9 (1RU) processor with 1784726K/6147K bytes of memory.
Processor board ID FJC2330A1S8
6 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
6598655K bytes of flash memory at bootflash:.
0K bytes of WebUI ODM Files at webui:.

Configuration register is 0x2102
Regards

[Georg Pauwen]

Hello,

the link below has a sample config for ikev2:

https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/117337-config-asa-router-00.html#anc20

[balaji.bandi · Accepted solution]

Since you got the right License Security one you can use below Links for reference to build the tunnel 

by the way, what is the other end device?

https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/117337-config-asa-router-00.html

https://www.omnisecu.com/ccna-security/how-to-configure-site-to-site-ikev2-ipsec-vpn-using-pre-shared-key-authentication.php