Hi every experts,
I would like to make the enquiry on how to set QoS on a specific interface based on http/https/udp on switch.
We have some VIPs who are seating at WTC and they found running Reuters program slowly via our corporate network (However, those speed is acceptable when connecting it directly to 100M broadband). The network path from WTC to the Internet over internal network is passing from WTC 60M MetroIP WAN 80M MetroIP DC Firewall corporate 100M Internet line. Should we set following on QoS on our DC / WTC core switch & dataline routers to accomplish this? Please advise.
Here match HTTP/HTTPS traffic and set the dscp to AF21 (Assumption: the source ip of the VIP is 10.116.107.23 and http & https are 80 & 443 respectively)
access-list 150 permit udp 10.116.107.23 any eq 80 443
class-map match-any HTTP
match access-group 150
set dscp af21
Thanks for your reply. Since the path across multiple hops, is it possible to apply the QoS using source ip without specifying source interface?
WTC > 60M MetroIP <> WAN à 80M MetroIP <> DC <> Firewall <> corporate 100M Internet line