Hello all, one of our customers uses the 2960c at a lot of locations but at one location we see some strange behavior when it comes to performance.The location has this setup: 887VA DSL router for E-VPN connectivity 2 2960C switches 1800 access p...
how to configure IP SLA echo that have criteria every 5 min ping 10 times.
Hai everyone After the configure the ibgp peering,I am get below message R2 R1 R3 R4 *Mar 19 04:56:32.915: %BGP-3-NOTIFICATION: sent to neighbor 2.2.2.2 4...
I have this command on Aethra EFM: add snmp COMMUNITIES ciscoread RO V1-V2c default_view 0.0.0.0/0 I need its equivalent in Cisco 888K9
HI , guys 1.do we use ms servers in cisco r & s environment . 2 is ms server is completely a separate platform. Regards , rammon.
Hi , I completed my cisco ccna course .i have a confusion how DNS, ip addresses are assigned to host in a branch office .with 150-200 hosts ..i mean is it complusory to use ms servers or configuring dhcp server ,dns server on routers.
HiWe are asked to deploy IPv6 in dual stack in our network in order to enhance our rank . Shall we Address all our internal network with public IPv6 addresses in order to enhance our rank ? is there any security issue in doing so? Is NAT still used...
HELLLLLLP!!! I am trying to filter advertised and received routes over a BGP connection to AWS and not having any success. I want to only allow 10.7.6.1 to send its network to 10.7.6.2 and I only want to receive 10.60.0.0/16 from 10.7.6.2 So here’s...
I have EEM applet scripts configured to apply some commands to help with failover scenarios in the network, my concern is the logs that generated continuously informing about the actions. Based on the configuration EEM applet is monitoring the interf...
I don't know how easy or hard this question is to answer without getting deep into details. But here is what I am trying to accomplish. I have (or will have) a data center and two collocations tied together with 10GB DWDM. The DC will have a 10GB cir...
Based on Diagram above: Client computer accessing server with public IP address 2.2.2.10 through ISP2. I need the return traffic much be back with ISP2, but default AD to ISP1 is lower. How to manage traffic to return to Client with origin ISP? ...
Hi All, Was just reading a old NBAR2 document relating to Protocol Pack 7 when I saw this note: Note The RTP audio/video sub-classification parameters are generic in nature and will match only on generic RTP traffic. More specific classification su...
Dear Friends, I am getting following error on the router, Gi0/0.12 122.199.226.222 Null 132.24.19.52 06 4rBC 0r8C 97 Please let me know the reason, and help me how to control this.
Hi All, I'm trying to control BGP advertisements and I have two questions about the different possibilities. a) Is it any way to control the number of prefix to advertise to a neighbor by number. b) Can I see the limit of prefixese stablished by ...
Dear readers, I am running into an issue, we are replacing a draytek router model 2130 with a Cisco 4331 router. The internal network is working fine but I cant seem to get the internet working. I tried searching the forums and looked up multiple Cis...
