Hi,
recently i saw this MSG. on the log file but i cant understand what is the cause route of it
LC/0/0/CPU0:Feb 26 21:46:30.694 UTC: fib_mgr[184]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at least 86400 seconds
RP/0/RSP1/CPU0:Feb 27 21:19:27.740 UTC: fib_mgr[230]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at least 86400 seconds
LC/0/1/CPU0:Feb 27 21:45:50.251 UTC: fib_mgr[184]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at least 86400 seconds
LC/0/0/CPU0:Feb 27 21:46:31.038 UTC: fib_mgr[184]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at least 86400 seconds
I did search on google and someone says that this alert appears after reload the LC cards but all the cards stable and did not has any reload on it since we install and run the box
Solved! Go to Solution.
- Tryout this release : https://software.cisco.com/download/home/282423206/type/280805694/release/7.1.3
and check if the problem remains in place or not.
M.
Hello,
if this is just an informational message, use the logging discriminator below to make that log entry not show up anymore:
logging discriminator FIB_RETRY severity drops 4 facility drops ROUTING mnemonics drops RETRYDB_NONEMPTY
logging buffered discriminator FIB_RETRY 100000
logging console discriminator FIB_RETRY
logging monitor discriminator FIB_RETRY
logging host x.x.x.x discriminator FIB_RETRY
- Which router-hardware platform is this ? You will find a number of related bug reports below :
https://bst.cloudapps.cisco.com/bugsearch/search?kw=ROUTING-FIB-4-RETRYDB_NONEMPTY&pf=prdNm&sb=anfr
It is always advisable to use an advisory software release for the router , if feasible and applicable.
M.
thank you for your support
this platform is ASR9006
Cisco IOS XR Software, Version 6.7.1[Default]
Copyright (c) 2020 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 0.76(c) 1994-2012 by Cisco Systems, Inc.
HB-AHL00-CSASR9-PE01 uptime is 14 weeks, 5 days, 23 hours, 18 minutes
System image file is "disk0:asr9k-os-mbi-6.7.1/0x100305/mbiasr9k-rsp3.vm"
cisco ASR9K Series (Intel 686 F6M14S4) processor with 12582912K bytes of memory.
Intel 686 F6M14S4 processor at 2136MHz, Revision 2.174
ASR 9006 4 Line Card Slot Chassis with V2 DC PEM
1 FastEthernet
4 Management Ethernet
20 GigabitEthernet
2 TenGigE
2 DWDM controller(s)
2 WANPHY controller(s)
503k bytes of non-volatile configuration memory.
6220M bytes of hard disk.
12510192k bytes of disk0: (Sector size 512 bytes).
12510192k bytes of disk1: (Sector size 512 bytes).
- Tryout this release : https://software.cisco.com/download/home/282423206/type/280805694/release/7.1.3
and check if the problem remains in place or not.
M.
Hello,
if this is just an informational message, use the logging discriminator below to make that log entry not show up anymore:
logging discriminator FIB_RETRY severity drops 4 facility drops ROUTING mnemonics drops RETRYDB_NONEMPTY
logging buffered discriminator FIB_RETRY 100000
logging console discriminator FIB_RETRY
logging monitor discriminator FIB_RETRY
logging host x.x.x.x discriminator FIB_RETRY