hiwe're on Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.2(2a)E1, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.Compiled Wed 10-Dec-14 03:54 by prod_rel...
Forum Posts
I deleted my OS image. The router is an old 2911. It does not boot (not a big surprise). I get stuck in ROMMAN mode. I would like to download a new OS image, but I have not been able to do. There are no more OS images on this box.There are 2 USB port...
hi,i bought a second hand 870 router, when i start the router it goes automatically to rommon. can someone help me out of this please. in advance thank you
Hi Guys, Please enlighten me what is the difference about the following about the OSPF. 1. "Network" command in OSPF process versus "IP OSPF" command in the interface level? 2. Which are the best practice? Thank you
I have a customer with cisco router has dual WAN and single LAN, customer required that dual WAN should work active/activeI changed the IP but the config is copy pasted, from below config the connection still going through ISP1 only, what should I ch...
Hi DearsI have I ASR1002X router By 4Gbytes Ram Default Hardwadre 3SPA cardand Licence 40GbpsNow i want Forward 30 Gbps Normally and 10 Gbps shape For exampleX.X.X.X/24 1Gbps shapeBest solution that best perforamce for shaping on ASR is police traff...
what is last input and output logs of interface ,can you any one explain in deep
i have promblem with routing. so i have 3 AS that connected with bgp, and in their internal connection use ospf. so i want to connect AS1 to AS 3. but i dont how to do. i can connect AS1 TO AS2 and AS2 to AS3, im still confusing how to connect AS1 to...
Hi all,We have a working DMVPN network where we have temporary issues with an ISP in the path between two spokes. We like to bypass the spoke-to-spoke shortcut communication between Spoke A site and Spoke B site and let traffic run accross the hub/he...
If anyone is aware of devices in the ISR1000 series that are 5G/LTE compatible routers equipped with DualSIM and capable of operating in Act/Act mode, I would appreciate it if you could share the information.
Resolved! Web Browser not working in servers/PC's
Hi, I am doing a project in my university. I am trying to implement RFID cards but for some reason, the web browser in my IoT server will not let me search IP addresses as it just comes up with server reset connection. I then tried this with every ot...
Hello Cisco Community,I'm currently facing a perplexing connectivity issue with two Cisco 2811 routers in my network. Despite configuring different IP addresses on their fe0/1 interfaces and ensuring they're both up with "no shutdown" commands, the p...
Hello Team,I currently have the following setup:An ISP router configured in bridge mode that provides internet to my Cisco router via LAN 4. Cisco router is configured with a DHCP server for IP addressing.I'd like to modify this configuration in orde...
i have configured a pc1 on inside of the ASA firewall and second pc2 on outside of the ASA firewal. inside security level 100 and outside security level 0. when i add acl from inside to outside and access-group ,i get replies from PC2 back.when i add...
I want to connect 2 ports of same switch back to back, but getting error like "the cable cannot be connected to that port"how to make the above connection, connection via hub is also not working. I basically need Switch1-------Switch2---Loop (loop be...
