10-12-2009 12:02 PM - edited 03-04-2019 06:20 AM
Hi,
GRE Tunnel is successfully established between RA & SA location.
OSPF is running on Local Area Network on both location && EIGRP is running between the tunnels.
On doing show ip route at RA backbone L3-Switch we noticed tons of routes from SA and same vice-versa.
We need specific network remote network to be seen on Backbone L3-Switch. I have read route map can help in my scenario, but unfortunately it didnt work.
need assistance to make this filter work
I would be happy to only see routes
192.168.120.0/24
192.168.150.0/24
192.168.100.0/24
10.255.250.0/23
from RA to SA
&&
need to only see routes
172.32.35.0/24
172.35.37.0/24
172.36.36.0/28
from SA to RA
10-12-2009 05:13 PM
saquib,
you can use prefix-list and also use distribute list to added to your EIGRP process:
ip prefix-list max24 seq 5 permit 0.0.0.0/0 ge 8 le 24
router eigrp 2
network 172.18.0.0
distribute-list prefix max24 in
Here is the link:
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfeigrp.html#wp1030091
HTH
Reza
10-12-2009 09:39 PM
Hi Reza,
Doesnt work?
Any support to get correct syntax.
Any source web link to understand different routing protocol with different filtering options with examples.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide