cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
12559
Views
0
Helpful
6
Replies

flash and dram size

Could some one pl's help me to find out my 3560 switch DRAM and flash size

#sh version

Cisco IOS Software, C3560E Software (C3560E-IPBASEK9-M), Version 15.0(2)SE, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Fri 27-Jul-12 23:44 by prod_rel_team

ROM: Bootstrap program is C3560E boot loader

BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)

COLITT-OOB-SW02 uptime is 3 weeks, 3 days, 5 hours, 0 minutes

System returned to ROM by power-on

System restarted at 22:34:38 MDT Sat Sep 15 2012

System image file is "flash:/c3560e-ipbasek9-mz.150-2.SE.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: ipbase

License Type: Permanent

Next reload license Level: ipbase

cisco WS-C3560X-48 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Processor board ID FDO1513Z0TJ

Last reset from power-on

7 Virtual Ethernet interfaces

1 FastEthernet interface

52 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

#sh flash

Directory of flash:/

    2  -rwx         976  Sep 28 2012 20:00:06 -06:00  vlan.dat

  444  -rwx        3833  Sep 28 2012 20:06:35 -06:00  private-config.text

    3  -rwx        9841  Sep 28 2012 20:06:35 -06:00  config.text

    4  -rwx        3096  Sep 28 2012 20:06:35 -06:00  multiple-fs

    5  -rwx    19678395  Sep 10 2012 16:29:43 -06:00  c3560e-ipbasek9-mz.150-2.SE.bin

    6  -rwx    12752912   Oct 3 2012 12:34:04 -06:00  c3560-ipservicesk9-mz.122-55.SE6.bin

    7  drwx         512  Feb 28 1993 17:14:53 -07:00  c3560e-universalk9-mz.122-55.SE1

57671680 bytes total (6986752 bytes free)

COLITT-OOB-SW02#

Everyone's tags (3)
6 REPLIES 6
Highlighted
VIP Mentor

Re: flash and dram size

sh flash: it will show the flash size.

57671680 bytes total (6986752 bytes free)

The line cisco WS-C3560X-48 (PowerPC405) processor (revision A0) with (x/y)262144K bytes of memory.

bytes of memory” tells how much RAM in your device. The first parameter  (x) specifies how much Dynamic RAM (DRAM) in your device while the  second parameter (y) indicates how much DRAM is being used.

but in your case total DRAM size is 262144K.

Regards

Please rate if it helps.


Highlighted

Re: flash and dram size

Hi Sandeep ,

Thanks for prompt reply.

sh flash: it will show the flash size.

57671680 bytes total (6986752 bytes free)

If you calculate it's showing as 55 MB. Is it really possible .

Highlighted
VIP Expert

Re: flash and dram size

Disclaimer

The Author of this posting offers the information contained  within this posting without consideration and with the reader's  understanding that there's no implied or expressed suitability or  fitness for any purpose. Information provided is for informational  purposes only and should not be construed as rendering professional  advice of any kind. Usage of this posting's information is solely at  reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

suryakant chavan wrote:

Hi Sandeep ,

Thanks for prompt reply.

sh flash: it will show the flash size.

57671680 bytes total (6986752 bytes free)

If you calculate it's showing as 55 MB. Is it really possible .

57671680 (used) + 6986752 (free) = 64658432 (total) or 64 MB flash.
Highlighted

Re: flash and dram size

I want to upload to a IOS which required 256 DRAM and 64 MB flash.

So will it support this requirement.

Highlighted
VIP Mentor

Re: flash and dram size

Yes it can be 64MB........some time u can see 128MB.

what is the size of new ios?????

as per your sh flash output, it seems that you will run the new ios "Ipservices". ??

if you dont have enough space then:

You should delete the bin file of previous version IOS from flash by using  delete /f /r flash:filename.bincommand.  Deleting files manually will not be a problem(I have tested several  times before - you can backup file incase of failure) Then you can  upload file to a flash memory and set it as a boot file by using boot system switch all flash:......command

Regards

Highlighted

Re: flash and dram size

Hi,
I want to ask, is it possible if I want to upgrade the DRAM on Cisco ISR 4451 (before 4G) to 16G. Is there any association with Flash Memory?
Thanks and Regards,
Bella