Hi
I have 7609-S platform and 2x 76-ES+T-4TG line card with different FPD
one line card's fpd:
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
3 76-ES+T-4TG 1.6 1-ROMMON 1.4 1.2
2-I/O FPGA 0.18 0.18
3-SELENE 0.18 0.18
---------------------- ------ ------------------ ----------- --------------
7600-ES+3CXL 1.3 4-PKT EN FPGA XL 0.8 0.8
11-Kp FPGA XL 1.2 1.2
---------------------- ------ ------------------ ----------- --------------
76-ES+T-4TGQ 1.2 22-40G-ITU_T LinkFPGA 0.6 0.1
==== ====================== ====== ============================================
and second line card's fpd:
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
4 76-ES+T-4TG 1.5 1-ROMMON 1.2 1.2
2-I/O FPGA 0.18 0.18
3-SELENE 0.18 0.18
---------------------- ------ ------------------ ----------- --------------
7600-ES+3CXL 1.2 4-PKT EN FPGA XL 0.8 0.8
11-Kp FPGA XL 1.2 1.2
---------------------- ------ ------------------ ----------- --------------
76-ES+T-4TGQ 1.1 8-4x10G LinkFPGA 0.21 0.21
==== ====================== ====== =============================================
when using urpf feature the line card with fpd 8-4x10G LinkFPGA punts packets in cpu and it raises to 99% but second line card with fpd 22-40G-ITU_T LinkFPGA works normal
Can I upgrade line card's fpd by specified ID?
