Frame relay & Internet connection

[wananga01]

I have setup a Cisco 1721 router to connect via frame-relay to my service provider.

From the router I can ping anywhere including Domain names.

From my workstation I can ping both router interfaces but not across the frame-relay link and I cannot access the Internet.

[mpabilona]

Since you are using private ip addresses for your local network, I suggest you implement cisco NAT. Implementation would be like this:

interface FastEthernet0

ip address 10.2.0.101 255.255.0.0

ip nat inside

speed auto

!

interface Serial0

ip address 203.167.213.126 255.255.255.252

encapsulation frame-relay IETF

frame-relay map ip 203.167.213.125 149

frame-relay interface-dlci 149

ip nat outside

!

ip route 0.0.0.0 0.0.0.0 203.167.213.125

ip nat inside source list 1 interface FastEthernet0 overload

!

access-list 1 permit 10.2.0.0 255.255.0.0

[wananga01]

Thanks I try this. Any idea if enabling NAT allow me to get access to the Interent from my work station?

[mpabilona]

Using your private lan ip through NAT, your internal workstations can access to internet via your default gateway.

[wananga01]

Thanks for your solution it worked which is simply great.

Much appreciated