Hi,
I've got a full t1 circuit problem I cannot resolve.
I don't manage the device at the other end of the circuit.
Config for both of my routers is the barest minimum on both routers:
!
interface Serial0/0
bandwidth 1536
ip address xx.yy.xxx.zzz 255.255.255.252
no fair-queue
service-module t1 timeslots 1-24
no cdp enable
!3250 router #1 goes up/up
Cisco 3250 v 12.4 with wic 1DSU-T1
All manner of advanced ping patterns are successful and do not generate errors on the interface.
!1700 router #2 down/down
Cisco 1700 version 15.something with HWIC 1DSU-T1 circuit is down/down
Debug complains no clock found on the 1700.
I've got a second 1700 that is known working and two more HWICs and I get the same down/down no clock found with all combinations of HWIC and router. Telco claims line tests clean and it is with an old router.
What else can I try?
What interface information might help?
Thanks in advance
