GSR XFP and SIP/SPA question

[Jaypal_pande]

Hi Guys,

I have couple questions regarding GSR XR 12000.

1) can I use XFP (XFP-10GLR-OC192SR - Multirate XFP module for 10GBASE-LR and OC192 SR-1) on a 10G LAN PHY SPA (SPA-1X10GE-L-V2 - Cisco 1-Port 10GE LAN-PHY Shared Port Adapter) ? From the dynamic configuration tool it seems that it can support STM64/10G WAN PHY and LAN PHY. I just need a confirmation.

2) For SIP-601 I tried to put together SPA-1X10GE-WL-V2 and SPA-OC192POS-XFP, but it gives me the error. Is there a reason these cards cannot run together in the same SIP-601. I have tried configuration for two of the same kind and it works.

Best reagrds and thanks.

[Frederic Vanderbecq]

Hello,

you can find the datasheet for all the supported XFP for the SPA-1X10GE-L-V2 at the following URL:

http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd804dc62d.html

For the second problem, which error do you get when inserting both SPA-1X10GE-WL-V2 and SPA-OC192POS-XFP at the same time ?

Best regards