hardware requirements for CGNAT (A9K)

[anas.abdullkarim]

hello, I have router A9K 9006,

I use it as BNG, with client POOL private ip address,

I need to enable CGNAT for private ip addresses to the public, what plugin hardware requirements must add to my router, and is need a license or not?

0/RSP0/CPU0     ASR9001-RP(Active)        IOS XR RUN       PWR,NSHUT,MON
0/0/CPU0        ASR9001-LC                IOS XR RUN       PWR,NSHUT,MON
0/0/0           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/0/1           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON

[marce1000 · Accepted solution]

 - Have  a look at this document look for carrier grade nat with your browser (find) : https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/datasheet-c78-735809.html

 M.