07-03-2022 06:31 AM - last edited on 07-04-2022 10:06 AM by Translator
What does these columns mean/how do I interpret it?
Column 1 'H' Column 4 'SRTT' column 5 'RTO'
Thank you
Solved! Go to Solution.
07-03-2022 06:36 AM - edited 07-03-2022 06:38 AM
H = the order in which the neighborships were established.
SRTT - the time in milliseconds it takes to send a packet to that neighbor and receive a response.
RTO - the time in milliseconds the router will wait before retransmitting a packet in the retransmission queue to that neighbor.
Jon
07-03-2022 06:36 AM - edited 07-03-2022 06:38 AM
H = the order in which the neighborships were established.
SRTT - the time in milliseconds it takes to send a packet to that neighbor and receive a response.
RTO - the time in milliseconds the router will wait before retransmitting a packet in the retransmission queue to that neighbor.
Jon
07-03-2022 06:56 AM - edited 07-03-2022 11:54 AM
you can not interpret it "meaning can not config"
this value is calculate from router for eigrp update message and ack message return from peer.
but you can use it to detect L2/L1 issue between two eigrp peer.
do you want to see this value change ?
if yes
add Sw between any two eigrp router, then wait until establish eigrp between two router, finally shut down the interface from one router to SW and check the value you will see
0 5000 1 <- this meaning L2/L1 issue between two router and this happened because the one router link is UP and send message and other router link is down,
the router with link UP don't receive ACK for message and the value change ""0 5000 1""
07-03-2022 09:50 AM
Thank you, both responses were helpful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide