hello i found this post and would like any help with it anyone can give.
I have been trying to solve this packet tracer lab TroubleShooting Enterprise Networks 1, score 68%.
Below are the modifications that score:
12% DHCP enabled on PC1 7% config S2 as VTP client 6% add vlan 30 to S3 6% add vlan 11 to S3 7% set no passive-interface S0/0/0 on Router 1 7% set no passive-interface S0/0/1 on Router 1 6% set no passive-interface fa0/1 on Router 1 6% set no passive-int on Fa0/0 no router 1
6% assign port S3 F0/2 to vlan 30 0% change vtp domain on S3 to CCNA_troubleshooting 6% add vlan 11 to S3 fa0/1 trunk
There is no check Items, I can't find anything else to fix.
Most appreciate if anyone could help so that I can complete this lab
here is a Link to the lab TroubleShooting Enterprise Networks 1
Do you use Cisco DNA Center? Have you used and are you willing to provide your feedback in using the Cisco DNA Center help and documentation?
If so, we’d like you to complete the survey linked below. Your feedback will help provide more effective and easi...
Listen: https://smarturl.it/CCRS9E18Follow us: https://twitter.com/CiscoChampion Reaching the height of your career is no simple feat. It often requires a combination of pursuing the right education, building the right professional network and being ...
In a typical production SD-WAN deployment, we would probably have many remote sites connected via many different Internet connections to a centralized data center or a regional hub. In most regions in the world, Internet providers will always use some typ...