03-31-2024 11:52 AM - edited 03-31-2024 12:12 PM
Hi guys. Here is a picture I have set up two static routes in R1 which are 10.10.10.2 & 172.168.2.2, while their administrative distance are default (1) , in this situation , I am so confused, why I can ping 10.10.10.2 from R1, but can't 172.16.2.2
Solved! Go to Solution.
03-31-2024 01:09 PM
Hello,
there simply is a typo in the IP address of Serial0/0/0 on R2. Change:
interface Serial0/0/0
ip address 172.168.2.2 255.255.255.0
to
interface Serial0/0/0
ip address 172.16.2.2 255.255.255.0
03-31-2024 12:01 PM
Hello,
post your zipped Packet Tracer project (pkt) file. If the routers are password protected, also include the passwords.
03-31-2024 12:14 PM
HI Georg Pauwen, thanks for reply, pkt file has been post in attached. Please have a check. Many thanks!
03-31-2024 01:09 PM
Hello,
there simply is a typo in the IP address of Serial0/0/0 on R2. Change:
interface Serial0/0/0
ip address 172.168.2.2 255.255.255.0
to
interface Serial0/0/0
ip address 172.16.2.2 255.255.255.0
03-31-2024 05:07 PM
Thank you for your help, I am shamed to make this mistake. Have a good rest Georg Pauwen.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide