05-28-2007 05:33 AM - edited 03-03-2019 05:10 PM
Hi I'm troubleshooting an atm/dsl interface on a 877 router. We have some problem whit CRC errors and Header errors. My problem is that I want to clear the counters(errors when "show dsl int atm 0"),
I have tried:
clear atm
clear int atm 0
clear counters atm
But nothing seems to work, is there another way to clear these counters.
05-28-2007 05:46 AM
Hi,
"clear counters atm 0" should do it.
If there is no problem in clearing all the counters on the router do "clear counters" and it should clear all your counters.
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-28-2007 05:54 AM
Hi
tried clear counter atm 0.
this clears only atm interface. I want to clear the information shown when command "sh dsl int atm 0". This is high-level DSL port information.
/ Lamin
05-28-2007 06:00 AM
Hi,
As i told you before, if there is no problem in clearing all the counters on the router do "clear counters" and it should clear all your counters.
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
03-02-2014 03:45 AM
Any good advise on the original question?
"clear counters" doesn't clear the stats when doing the command: show dsl int atm 0 which is what was originally asked. Clear counters only clears interface stats
03-02-2014 09:06 AM
Only a reload will clear these counters.
Sent from Cisco Technical Support iPad App
03-02-2014 09:18 AM
Thanks for the helpful reply!
01-04-2024 02:05 PM
CRC Errors: NA 5249887 NA 3695
r01c43#clear controll vds 0/2/0
r01c43#show controll vdsL 0/2/0
CRC Errors: NA 0 NA 0
Clear controller - clear controller counters
Clear interface - resets interface
Clear counters - clear interface counters
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide