How to configure NTP on Firewall and Switch

[chetansharma]

Hi,

i have two asa firewall in LAN based active/standby failover and two 4507r switch in HSRP.

I want to configure the NTP to syn these network devices with my NTP server.

PLease suggest..

Thank You

Chetan

[araujojoel]

Hi,

have a look at the info provided here:

http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_basic_sys_manage.html

In global config mode, you need to specify the ip address of the internal or external Time server

Router(config)# ntp server 192.168.13.57