How to configuring a ASA 5505 to switch NAT?

[Kimjohn]

RO1

150.183.11.1/24

Security Level 0

ASA0

150.183.11.2/24

Security Level 100

PC2 

VLAN: VLAN 10

NAME: VLAN_10

192.168.101.2/24

NAT - Default

[Cristian Matei · Accepted solution]

Hi,

   What do you mean by switch NAT? What are you trying to achieve, configure the ASA to perform NAT? What subnets do you want to NAT, how (static, dynamic), and into what (ip, pool, subnet)? Here's two guides to help you on the NAT implementation on the ASA:

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html

https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/118996-config-asa-00.html?referring_site=RE&pos=3&page=https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz...

Regards,

Cristian Matei.