cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1964
Views
5
Helpful
8
Replies

how to make a backup copy of my router configuration

unidadso
Spotlight
Spotlight

how to make a backup copy of my router configuration cisco isr 1100

1 Accepted Solution

Accepted Solutions

Martin L
VIP
VIP


3rd option I forgot is Putty logging of output. it is sort of automatic; it writes all command that u do in CLI.

see option in putty

putty logging.JPG

 

after selecting options, go back to sessions and login .

after that, go back to Browse and look for your file. u can open in notepad

 

Regards, ML
**Please Rate All Helpful Responses **

View solution in original post

8 Replies 8

Martin L
VIP
VIP


send configs to tftp server once per every week manually or using script.

1. manual

copy running-config tftp://<SERVER_IP>/<FILE_NAME/

 

2. Cisco IOS Auto Archive Feature was introduced into Cisco IOS Release 12.3(4), the Archive command enables the administrator to configure snapshots of the configuration files. (research archive command in Cisco Doc)

 

R1(config)#archive
R1(config-archive)#path tftp://172.16.1.10/
R1(config-archive)#time-period 10080

 

Regards, ML
**Please Rate All Helpful Responses **


I have 2 questions

when doing this process what type of extension is passed

and how the confiuration would be restored

advantages of doing it by ftp

and advantages pass it to a txt

advantages of doing it by tftp

-no mulitple copy and paste as u go and moving screen. if your config is long, u will not fit all of it on 1 screen.  plus, unless u modify windows registry to large scroll back,  info will be overwritten after few scrolls

 

advantages pass it to a txt  - are only simplicity and quickness if u have small show run. 

 

Regards, ML
**Please Rate All Helpful Responses **

luis_cordova
VIP Alumni
VIP Alumni

Hi @unidadso ,

 

Another option:

Execute the command:

R# show running-config

 

Copy the entire result and paste it into a .txt

 

To return the settings, copy the entire .txt in global configuration mode:

R(config)#

 

Then, you just have to turn on all the configured interfaces:

R(config-if)#no shutdown

 

Regards

 

Is there a solution to prevent a config or list of commands from being messed up when I manually copy it to a router?

Martin L
VIP
VIP


3rd option I forgot is Putty logging of output. it is sort of automatic; it writes all command that u do in CLI.

see option in putty

putty logging.JPG

 

after selecting options, go back to sessions and login .

after that, go back to Browse and look for your file. u can open in notepad

 

Regards, ML
**Please Rate All Helpful Responses **

thanks this was what i needed
Review Cisco Networking for a $25 gift card