04-15-2012 11:45 PM - edited 03-04-2019 04:01 PM
Hi,
How can I open a tcp/udp port on cisco router for listering alarm from public ip at the exact port which i opened.
Thans &Regards
Siahanu N
04-16-2012 12:05 AM
Hello,
Can you ask the question one more time being a little bit more clear.
I would be more than glad to help.
Julio
04-16-2012 12:22 AM
Thanks for your responds.
Our branch offices survillance system was installed.The DVR send alrams to our public ip at specific port.public ip is configured on our cisco router 2621 router.How can I monitor that alarm.there are 1500 branches which send alarm to a common public ip with uniqe tcp port .
Example:
Branch 1:
Alarm port 5555
Alarm host ip 124.124.55.33
Branch 2:
Alarm port:5556
Alarm host ip :124.124.55.33
.
.
.
.
Branch 1500:
Alarm port:6500
Alarm host ip :124.124.55.33
I think u understand the isse.Please help me.
Thanks & Regards
Sihanu N
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide