03-08-2020 08:58 PM - edited 03-09-2020 08:02 AM
Hello.
I'm adlina, I'm from Indonesia. I am currently working on a project to redistribute ISISv6 and OSPFv3 routing protocols using the ipv6 addressing protocol. the media that I use is GNS3 software. can anyone help me to configure the ospf and isis redistribution syntax? i need more help so much.
Thankyou
03-09-2020 01:03 AM
Hello,
not sure what your topology looks like, but below is the general, generic syntax:
ip cef
ipv6 unicast-routing
ipv6 cef
!
interface Loopback1
no ip address
ipv6 address 1111::1/128
ipv6 ospf 1 area 0
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
media-type rj45
ipv6 address 2020:1:1:1::1/64
ipv6 ospf 1 area 0
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
media-type rj45
ipv6 address 2001::1/64
ipv6 router isis area1
isis ipv6 tag 100
!
router ospfv3 1
!
address-family ipv4 unicast
exit-address-family
!
address-family ipv6 unicast
redistribute isis tag1 metric-type 1 level-1-2
router-id 1.1.1.1
exit-address-family
!
router isis area1
!
router isis tag1
net 49.0000.0000.0200.00
metric-style wide
redistribute ospfv3 1 match internal external 1 external 2
03-09-2020 08:00 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide