How to setup site to site vpn with RV260W routers?

[moheban79]

Hi,

Have a couple of RV260s and want to setup site to site vpn and confused about the finer details not mentioned in the guide. Such as does each site require a different internal ip address or can each one internally be the default 192.168.1.1?

Thanks

[balaji.bandi]

here is the guide to setup one :

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/Configuring_Site-to-Site_VPN_on_the_RV160_and_RV260.html

If you looking both side, suggest if you can have different internal IP address as shown in the guide.

If you are doing existing the network, if it is overlap you need to double NAT, which is not suggest (only can be alternative option)

if our setup new, please use different subnet.