11-29-2012 06:13 AM - edited 03-04-2019 06:16 PM
hello all.
I have dual ISP's comming into my network on two different routers. i have configured HSRP on my gateway router to failover if any of the tracked interfaces go down. How ever, there are instances where we lose internet connectivity upstream (not that the interface has failed or gone down) and in these cases the failover doesn't work.
is it possible to track eg, pings to google, such that, should pings fail HSRP should failover?
11-29-2012 06:18 AM
Dear Amos,
Can you post the config removing sensitive areas and have you included tracking interfaces in your config
Regards
Thanveer
"Everybody is genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is a stupid."
11-29-2012 06:20 AM
Hi,
http://mellowd.co.uk/ccie/?p=827
Regards.
Alain
Don't forget to rate helpful posts.
11-29-2012 06:22 AM
You can configure it using IP SLA to check the ping reachability to the ISP IP address
track 10 ip sla 123 reachability delay down 10 up 10 ip sla 123 icmp-echo x.x.x.x ip sla schedule 123 life forever start-time now Calling this track in hsrp standby 1 track 10
Reference link:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800a9679.shtml
Raju
12-02-2012 10:12 AM
hi.
i tried to do this config but my router doesnt have the "monitor" option.
take a look below.
(config)#ip sla ?
key-chain Use MD5 Authentication for IP SLAs Control Messages
responder Enable IP SLAs Responder
server IPPM server configuration
what should i do....??
01-07-2013 05:56 AM
Many thanks, It works for me.
01-23-2013 03:58 AM
what version of IOS are you using? is it the same as the one in the "show vwersion" i pasted earlier?
12-02-2012 03:00 PM
Hi
Can you please provide a Show Version. Ip sla has changed over Time. Old Versions May know rtr and track as commands.
Patrick
Sent from Cisco Technical Support iPhone App
12-03-2012 12:24 AM
gateway#sh ver
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(4)M3, REL
EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 06-Dec-11 19:44 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M13, RELEASE SOFTWARE (fc1)
FIBER_rtr_gateway uptime is 4 days, 20 hours, 25 minutes
System returned to ROM by reload at 11:52:30 UTC Wed Nov 28 2012
System restarted at 11:53:57 UTC Wed Nov 28 2012
System image file is "flash0:c3900-universalk9-mz.SPA.151-4.M3.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 987136K/61440K
bytes of memory.
Processor board ID FGL161412M3
3 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C3900-SPE150/K9 FOC16082HFZ
Technology Package License Information for Module:'c3900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
Configuration register is 0x2102
12-03-2012 02:25 AM
IP Base licnece has only IP SLA responder feature.
You need any of the UC, Data or Security licence to configure IP SLA probes
http://www.cisco.com/en/US/prod/collateral/modules/ps10598/ordering_guide_c07_557736.html
Raju
12-03-2012 08:46 AM
hi Raju.
thanks for the response. I will try to download the security image from the cisco site and test it.
12-03-2012 09:40 AM
Hi
It is an Universal Image . It is suffizient to add the Lic.
Sent from Cisco Technical Support iPhone App
01-23-2013 03:58 AM
I dont understand what you mean....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide