11-08-2016 05:15 AM - edited 03-05-2019 07:26 AM
Hi All,
I'm looking to setup the following and was wondering if someone could answer a few questions that I have.
Setup:
We want to run BGP on both routers (the one that connects to the leased line and the ADSL line) and configure them as an HSRP/VRRP pair, so that if the leased line fails the LAN users can still access the internet and connect to the main office through a S2S VPN that terminates on the firewalls. BGP will only be used to advertise our public subnet to the ISP
Questions
Thanks in advance for your time.
Ranil
Solved! Go to Solution.
11-08-2016 05:58 AM
Hi
Can a 4321 and a 887VA form an HSRP/VRRP pair as they are running IOS XE and IOS?
That's not an issue it will work between both routers
How much RAM and Flash is recommended on each router for BGP?
flash is only an isuse to the size of an image , both routers should have enough speace to support the image size by default
800s cannot support full BGP table they cant handle it in cpu or ram and 4321 even with 8GB ram may struggle a bit with full table , are you planning on reducing what's learned inform your ISP in terms of prefixes ? route-map and prefix filtering ?
the leased line is that 100 download 20 up , the 4321 supports and aggregate of 50 - 100mps may need to get the 100mpbs for it , performance per demand
http://www.cisco.com/c/dam/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/whitepaper_c11-732909.pdf
11-08-2016 05:58 AM
Hi
Can a 4321 and a 887VA form an HSRP/VRRP pair as they are running IOS XE and IOS?
That's not an issue it will work between both routers
How much RAM and Flash is recommended on each router for BGP?
flash is only an isuse to the size of an image , both routers should have enough speace to support the image size by default
800s cannot support full BGP table they cant handle it in cpu or ram and 4321 even with 8GB ram may struggle a bit with full table , are you planning on reducing what's learned inform your ISP in terms of prefixes ? route-map and prefix filtering ?
the leased line is that 100 download 20 up , the 4321 supports and aggregate of 50 - 100mps may need to get the 100mpbs for it , performance per demand
http://www.cisco.com/c/dam/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/whitepaper_c11-732909.pdf
11-08-2016 07:33 AM
Thanks Mark.
Yes we'll be doing filtering hopefully these will be alright. Am I right in thinking that the 4321 will need a data license and the 887 will need an Advanced IP license?
Thanks again for your help
Ranil
11-08-2016 08:12 AM
Yes that's right 4000 series have data license all my routers that have BGP enabled are running Data and 800 series , I have 881s here which I presume licences wil be the same im running BGP on them and its advipservices
11-09-2016 08:25 AM
Brilliant! Thank you very much. Really appreciate your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide