05-29-2013 09:59 PM - edited 03-04-2019 08:03 PM
Hi all.
As with this post,
https://supportforums.cisco.com/message/789836#789836 I have an 1841 and want to install an HWIC-1ADSL.
I have tried the Software Tool mentioned but get awfully confused by the end result.
My 1841 show version is:
Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(22)YB3, RELEASE SOFTWARE (fc1)
...
...
System image file is "flash:c1841-spservicesk9-mz.124-22.YB3.bin"
...
...
Cisco 1841 (revision 7.0) with 118784K/12288K bytes of memory.
Just wanting to know if the HWIC-1ADSL will work with this IOS?
Many thanks in advance.
Andrew
Solved! Go to Solution.
05-29-2013 10:07 PM
No it won't. You need to use, a minimum of, 12.4(4)T. Pay attention to the "T" train.
Go here. Look at the left-hand column.
Click the 12.4 > 12.4T and choose for the IOS of your choice.
Please don't forget to rate our useful posts. Thanks.
05-29-2013 10:45 PM
I suppose the latest and greatest firmware would be the most appropriate, in the 12.4 range, eg 12.4.24T8(ED), would you agree?
I can't make that decision for you. For me, I would. Read the Release Notes so you'll know what open cavaets are still available.
When I speak to my supplier, they tell me that support for this device is discontinued and that it is no longer available for a new contract.
1841 is already End-of-Sale since 01 November 2010, however, you can try to get your vendor to download the IOS for you.
05-29-2013 10:07 PM
No it won't. You need to use, a minimum of, 12.4(4)T. Pay attention to the "T" train.
Go here. Look at the left-hand column.
Click the 12.4 > 12.4T and choose for the IOS of your choice.
Please don't forget to rate our useful posts. Thanks.
05-29-2013 10:31 PM
Wow, lightning response.
Thanks for your reply leolaohoo.
I suppose the latest and greatest firmware would be the most appropriate, in the 12.4 range, eg 12.4.24T8(ED), would you agree?
When I try to download it, I am advised that I need a service contract.
When I speak to my supplier, they tell me that support for this device is discontinued and that it is no longer available for a new contract.
Does anyone have any suggestions about how I can get an upgrade for my 1841?
05-29-2013 10:45 PM
I suppose the latest and greatest firmware would be the most appropriate, in the 12.4 range, eg 12.4.24T8(ED), would you agree?
I can't make that decision for you. For me, I would. Read the Release Notes so you'll know what open cavaets are still available.
When I speak to my supplier, they tell me that support for this device is discontinued and that it is no longer available for a new contract.
1841 is already End-of-Sale since 01 November 2010, however, you can try to get your vendor to download the IOS for you.
05-29-2013 11:03 PM
Many thanks again for your assistance.
A second supplier has given the same spiel, it is a non supported device and they cannot give me a new support contract for it (they can extend or renew an existing contract).
I think that is stupid. Just because it is no longer a supported device, doesn't mean I shouldn't be able to get a firmware upgrade for it, firmware that already exists.
IMO if it is an unsupported device, the firmware should be unlocked and free!
My 2 cents worth.
Thanks again leolaohoo.
05-30-2013 04:01 AM
I agree.
Thanks for the ratings.
Sent from Cisco Technical Support Nintendo App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide