cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2292
Views
0
Helpful
10
Replies

i have problem memory not enough

 

Untitled.jpg

 

I bought a router  and it did not have iso only running in rommon and when I try to download iso image via xmodem I get an error message that the memory is not enough and when I write the dir flash command, I will not see any iso and .My question is is there a way to delete the memory files or a solution to this problem

 
 
 
 
 
 
1 Accepted Solution

Accepted Solutions

Looks like CF card having an issue :

 

Turn off the Router, eject CF card, format with Windows (if you have multi-card reader) with fat 16 format.

 

follow again below link to load IOS using xmodem ?

 

i can not remember 1841 do have USB right, so you can use USB to load IOS and format flash.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

10 Replies 10

balaji.bandi
Hall of Fame
Hall of Fame

what is the model of the device? 

 

Power off the device - connect the console post complete output until you see romon >

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Router 1841


@khudayersinan88665 wrote:

Router 1841


If this is an 1841, what is the ROMMON output to the command "dir flash:"?

Another thing, 1841 uses a compact flash (CF) to store files and IOS.  Does this come with one or not?

 

check what is there in the flash for now : (issuing dir command)

 

what is the IOS version you trying to upload? what size is this ?

 

follow the thread : which give you information how you can upload the firmware using xmodem, do not ask us how you can get the Firmware, you can google you get many available sites and you can use it for Lab purpose.

 

https://community.cisco.com/t5/switching/how-to-reset-cisco-router-1841-password/td-p/2065749

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

c1841-advipservicesk9-mz.151-4.M12a.bin

size 43 mb

Looks like CF card having an issue :

 

Turn off the Router, eject CF card, format with Windows (if you have multi-card reader) with fat 16 format.

 

follow again below link to load IOS using xmodem ?

 

i can not remember 1841 do have USB right, so you can use USB to load IOS and format flash.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I find the problem CF card not working

 


@balaji.bandi wrote:

i can not remember 1841 do have USB right, so you can use USB to load IOS and format flash.


1841 have two USB ports, however, to use these ports in ROMMON, the ROMMON firmware needs to be updated.  Very high chance nobody knows about this.


@Leo Laohoo wrote:

@balaji.bandi wrote:

i can not remember 1841 do have USB right, so you can use USB to load IOS and format flash.


1841 have two USB ports, however, to use these ports in ROMMON, the ROMMON firmware needs to be updated.  Very high chance nobody knows about this.


yes agreed, can not remember its old days, after move to ASR and ISR, lost hands on these device, good to know, thank you.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help