I need urgent help please in packet tracer

[h00384864]

Guys, look, here he has two networks and three routers, but I can't ping the other network, I don't know why, is there any help please?

[h00384864]

Please I need help

[Georg Pauwen · Accepted solution]

Hello,

post your zipped Packet Tracer project (.pkt) file, and indicate which version of Packet Tracer you are using...

[h00384864]

This is a special package trace file

[Georg Pauwen · Accepted solution]

Hello,

what instructions are you following ? Your routers have no routing (static or dynamic) configured, the IP addressing on the WAN interfaces is wrong/duplicate, and the LAN IP addressing is wrong/duplicate as well.

[h00384864]

How well can these problems be solved?

[h00384864]

My friend, how can we solve this problem?

[Georg Pauwen · Accepted solution]

Hello,

it depends on the requirements. You can use static routing, or a dynamic routing protocol (RIPv2/EIGRP/OSPF). You also need to decide what IP addressing scheme you want (or have) to use. Is this project based on specific instructions ?

[h00384864 · Accepted solution]

I tried to use the RIP protocol, but it didn't work for me. Just wait for me to get home. I will upload the file to you after my last modification. He now has 3 networks, 3 regular routers and one wireless router.

My friend, when I upload the new file to you, I want you to look at it if possible and tell me all its problems and how I can solve them myself.

[Georg Pauwen · Accepted solution]

Hello,

sure, send the new file. The most important thing is the IP addressing, you need to make sure that there are no duplicate IP addresses anywhere.

[h00384864]

At first, I am very sorry for the delay in replying to you and uploading the file to you, but I was in the hospital, so I am very sorry for the delay

And this is the file. I uploaded it to you. Did you correct it for me and then send it back to me so that I can see for myself what I did and learn it myself?

[Georg Pauwen]

Hello,

attached the revised file. Keep in mind that you need unique subnets between the routers, and also unique networks/subnets on all other interfaces. I had to change a lot of the IP addressing, it is all arbitrary since I do not know which specific IP addressing scheme you are supposed to use.

[h00384864]

Ok, thank you, I will try the file you gave me and I will get back to you with good news

[h00384864]

It doesn't deliver ping , I don't know why