I to all,
we have a catalyst 6504-E with SUP720 (IOS 12.2(18)SXF12a) switch with several L3 routed ports, I configured this ports to export netflow data to Orion Traffic Analyzer server but I can see only the egress traffic.
You can see the config below:
-- GLOBAL CONFIG --
mls flow ip full
mls nde sender version 5
ip flow-export source Loopback0
ip flow-export destination "IP ORION" 9996
-- ROUTED INTERFACE CONFIG --
ip flow ingress
ip route-cache flow
Do I miss something in the config? Why I cannot see the ingress traffic data on the configured interfaces?
Tks in advance