11-29-2012 06:55 AM - edited 03-04-2019 06:16 PM
We have two sites Site A and Site B
Site A has internet and Site B needs to access the internet from site A
I am using OSPF and both sites can see routes to the other site
Site B has the IP address of site A's end of the point to point as the Gateway of last resort however Site B cant access the internet still
When I do show ip route 0.0.0.0 it points towards the ip of site A's end of the point to point
I need to urgently solve this
Thanks in advance for you help
12-03-2012 03:48 AM
Yes the firewall is natting and natting for any IP trying to access the internet.
12-03-2012 08:18 AM
So this looks like a simple layer 2 point to point link. Both sites are under the same network i.e; 10.120.20.xxx/xx. So your Site B Switch make your Site A Core switch as the next hop not the 10.120.20.22.
12-04-2012 01:22 AM
No they are not under the same network
site A is 10.120.0.0
Site B is 10.121.0.0
12-04-2012 01:31 AM
Hello,
Is Your FW running OSPF?
Can SideB go to firewall(just test connections)?
Does Firewall NAT SiteB-Network?
HTH,
Toshi
12-04-2012 06:42 AM
Yes the firewall is running OSPF
Side can ping the firewall
Yes the firewall NATs any address trying to access the internet
12-04-2012 07:15 AM
From site B, can you ping 4.2.2.1 or 8.8.8.8?
HTH,
John
*** Please rate all useful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide