Hi All,
Actually I recently take a mpls link for connecting two of my branches.
My concern is that can the Internet traffic flow over the MPLS LINK.
and secondly I configure the both branch 881 cisco router and my end to end coneectivity is working fine .
my hub branch have also internet connection and i want internet access on spoke branch also.
my spoke site configuration is as
mpls wan ip ---10.10.10.6/30
default gateway--10.10.10.5/30
lan network --192.168.2.0/24(dhcp pool)
vlan1 --192.168.2.1/24
default router --192.168.2.1
ip route 192.168.1.0 255.255.255.0 10.10.10.5 (for hub end lan)
ip route 0.0.0.0 0.0.0.0 10.10.10.5 (for internet traffic)
my hub site configuration is as
mpls wan ip ---10.10.10.2/30
default gateway--10.10.10.1/30
lan network --192.168.1.0/24(dhcp pool)
vlan1 ---192.168.1.2
default router ---192.168.1.2
ip route 192.168.2.0 255.255.255.0 10.10.10.1 (for hub end lan)
ip route 0.0.0.0 0.0.0.0 192.168.1.1 (for internet traffic)
192.168.1.1 is my default gateway for internet it is at my tp link router
please suggest the way so that my spoke can access the internet through mpls link.
Is there any need to apply the routing protocol like rip or ospf on my hub and spoke router to implement for routing between lan and mpls network.
