01-03-2008 08:00 AM - edited 03-03-2019 08:07 PM
I am trying to figure out what IOS is needed on my 2620 to be able to run the command "crypto key generate ...".
Thank you
Solved! Go to Solution.
01-03-2008 08:10 AM
You'll need a security enabled IOS, so look through the upgrade planner for an IOS that has IPSEC or 3DES or 56 in the description, or if you only have file names, look for K9 in the name.
GL
01-03-2008 08:09 AM
Hi,
this one should be ok:
c2600-adventerprisek9-mz.123-8.ZA1.bin
You can use IOS navigator tool:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH
Regards
Ivan
[rate any helpful posts]
01-03-2008 08:10 AM
You'll need a security enabled IOS, so look through the upgrade planner for an IOS that has IPSEC or 3DES or 56 in the description, or if you only have file names, look for K9 in the name.
GL
01-07-2008 05:32 AM
cryto key generate, use Advance security already enough.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide