We are currently upgrading IOS for our 7206VXR Internet routers. The specification is as follows:
production_internet#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(19)E, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 30-May-03 04:52 by hqluong
Image text-base: 0x60008C08, data-base: 0x612AE000
ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
production_internet uptime is 5 hours, 35 minutes
System returned to ROM by power-on
System image file is "slot0:c7200-is-mz.121-19.E.bin"
cisco 7206VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memory.
Processor board ID 21276120
R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
6 slot VXR midplane, Version 2.1
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
Number of Fast PAs = 2
Number of Fast+Medium PAs = 2
Total number of PA bandwidth points = 400
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
62976K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102
production_internet#sh bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image 6C5A2BEC 3236BC 22 3028540 Mar 16 1993 06:43:07 c7200-boot-mz.120-13.S
379204 bytes available (3028668 bytes used)
production_internet#sh slot0:
-#- ED ----type---- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image 8E3738A0 A6BD3C 24 10796220 Jul 26 2003 09:19:52 c7200-is-mz.121-19.E.bin
9781956 bytes available (10796348 bytes used)
We installed the new boot file and IOS on a 64M Flash card. The problem is that the boot file is bigger than the bootflash space, how can we configure this with “boot system” commands. The 64M flash contents on disk1 are:
production_internet#sh disk1:
-#- --length-- -----date/time------ path
1 26486388 Nov 19 2005 02:34:20 c7200-jk9s-mz.124-3.bin
2 7606775 Nov 19 2005 02:35:20 c7200-kboot-mz.124-3.bin
30146560 bytes available (34078720 bytes used)
Your help is much appreciated.
