cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5309
Views
5
Helpful
5
Replies

IOS XE debugging problem

bmcgahan
Level 1
Level 1

Does IOS XE not support debugging of received packets with the "debug ip packet" output?  I have a case where the router only shows locally generated packets in "debug ip packet [detail]" output, but nothing that is being received.  This is both for data plane, e.g. ICMP echo, and for control plane, e.g. EIGRP or OSPF hellos.  I tried disabling CEF as well but it's not supported on this platform:

 

Router(config)#no ip cef distributed 

%Cannot disable CEF on this platform

Router(config-if)#no ip route-cache 
Platform cannot disable ip route-cache on GigabitEthernet1 interface

 

This is on IOS XE ver 03.11.00.S for CSR1000v.