IOS XR ip sla command not supported

[Shajil Melethil]

Hello ,

ASR 9000 (ios-xr) doesnt have ipsla command.

can anyone let us know what is the issue and how to fix,

version is 6.1.4

Thanks

[balaji.bandi]

it should work as expected

can you go to config t 

ip sla ?  (post the output ?)

or 

ipsla ?

here is reference guide :

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-5/system-monitoring/configuration/guide/b-system-monitoring-cg-asr9000-65x/b-system-monitoring-cg-asr9000-65x_chapter_0100.html

[Shajil Melethil]

Here how it is showing


RP/0/RSP0/CPU0:GW1ICPRC02#config t

Fri Mar 26 06:00:58.853 UTC

RP/0/RSP0/CPU0(config)#ip sla ?

^

% Invalid input detected at '^' marker.

RP/0/RSP0/CPU0:GW1ICPRC02(config)#ipsla ?

^

% Invalid input detected at '^' marker.
RP/0/RSP0/CPU0(config)#ipsla

[balaji.bandi]

just to confirm is this a real kit or lab? 

can you post-show version

[Shajil Melethil]

I dont see the option.

i have another ASR9K with same version and i can configure ipsla there.

is there any feature to be enabled or etc ?

RP/0/RSP0/CPU0:GW1ICPRC02#config t

Fri Mar 26 06:00:58.853 UTC

RP/0/RSP0/CPU0(config)#ip sla ?

                                   ^

% Invalid input detected at '^' marker.

RP/0/RSP0/CPU0:GW1ICPRC02(config)#ipsla ?

                                    ^

% Invalid input detected at '^' marker.

RP/0/RSP0/CPU0(config)#ipsla

[Georg Pauwen]

Hello,

odd indeed. 

When I look at the command reference, the syntax of the command they give looks slightly different:

RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ipsla
RP/0/RSP0/CPU0:router(config-ipsla)#

[Harold Ritter]

Hi Shajil,

You need to enable the manageability package, so you can use IP SLA.

Node 0/RSP0/CPU0 [RP]
Boot Partition: xr_lv1178
Active Packages: 14
asr9k-xr-7.1.2 version=7.1.2 [Boot image]
asr9k-mgbl-x64-2.0.0.0-r712 <+++++++++++++++++++++++ This is the package you are missing.
asr9k-mpls-x64-2.0.0.0-r712
asr9k-isis-x64-1.1.0.0-r712

Refer to the following configuration guide to configure ip sla, after installing the manageability package.

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-5/system-monitoring/configuration/guide/b-system-monitoring-cg-asr9000-65x/b-system-monitoring-cg-asr9000-65x_chapter_0100.html#ref_1003836

Regards,

[Shajil Melethil]

I have the mgbl file in my disk0; but seems like it is not activated in
router as i dont see it in show version.

How can i specifically activate that package only ?
asr9k-mgbl-px.pie-6.1.4

Please let me know

is there any impact if i do activate it ?

[Shajil Melethil]

Hello,

I think below is one i am missing. I have another router having those packages and missing in problem router

below is working one

RP/0/RSP0/CPU0:#s install active detail | in mgbl

Fri Mar 26 16:12:51.299 UTC

      disk0:asr9k-mgbl-px-6.1.4

          disk0:asr9k-mgbl-supp-6.1.4

          disk0:iosxr-mgbl-6.1.4

RP/0/RSP0/CPU0:#

in problemactic router , there is no output. i can copy this file there.

but how to activate the package ?

Thanks

[Harold Ritter]

Try "admin install activate disk0:asr9k-mgbl-px.pie-6.1.4"

Regards,