cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1620
Views
0
Helpful
3
Replies
Highlighted

IP SLA and SNMP monitoring

Hello All,

I want to create a IP SLA so that I can monitor UP time for ISP's as the I Ethernet connectivity, so if there link down beyond the mux, i cannot find that when it went down and at what time it came back, Basically for how long it? So i want to set IP SLA between CE-PE and same i want to plot a graph in MTRG so that NOC team can motinor as well we can pull historical report for that link.

 

Can you please suggest if this is achievable? if yes than how can i achieve this?

 

Thanks

Jagdev

1 ACCEPTED SOLUTION

Accepted Solutions

Hi Jagdev ,  Yes you can

Hi Jagdev ,

  Yes you can specify tag on your configuration 

tag text

Example:

Router(config-sla-monitor-echo)# tag TelnetPollServer1

 

HTH

Sandy

View solution in original post

3 REPLIES 3

 Hi , You can configure IP

 

Hi ,

 You can configure IP SLA on your device using below link 

http://www.cisco.com/c/en/us/td/docs/ios/12_4/ip_sla/configuration/guide/hsla_c/hsicmp.html

you need to download MIB on to your MRTG server for montioring 

CISCO-IPSLA-ECHO-MIB

CISCO-IPSLA-ETHERNET-MIB

Look into below url for loading MIB 

http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.html

 

HTH

Sandy

Thanks Sandy, I am planning

Thanks Sandy,

 

I am planning to configure following stuff on CE router:-

 ip sla monitor 11
 type echo protocol ipIcmpEcho 10.1.3.1 source-ip 10.1.3.2
 owner TEST
 threshold 15
 timeout 15
 frequency 5
ip sla schedule 11 life forever start-time now

 

I want to give tag to each SLA, will this states in MRTG, related to time instead of latency, which i can see in following commands:-

sh ip sla statistics

sh ip sla statistics details

Thanks

Jagdev

Hi Jagdev ,  Yes you can

Hi Jagdev ,

  Yes you can specify tag on your configuration 

tag text

Example:

Router(config-sla-monitor-echo)# tag TelnetPollServer1

 

HTH

Sandy

View solution in original post

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here