I'm not sure if I have entered this questions into the correct disscusion group
I have created an IP SLA using Jitter-Path for an MPLS link, I have also created a reaction-configuration entry with a threshold of 1 5 for the round trip time(rtt). I have scheduled the IP SLA to run continuously. When I do the 'Show IP SLA 1 Statistics' the rtt does rise above 5ms at times however I never recieve an event in the syslog, actually that's a lie I see one random threshold entry and then nothing, once the IP SLA has reached do I need to schedule a reset or something?. That brings me to my second question, I would like to match the threshold pattern in the syslog and send out an email with the 'Show IP SLA 1 Statistics' results in the body of the email. Any advice would be greatly appreciated.
ok, I eventually worked out what I was doing wrong, the thresholds were incorrectly configured and I didn't understand fully how they worked. I now have another query - I have configured a event manager command to run a cli action and email the results based on a syslog pattern. When I use the follwoing command it works:
event syslog pattern "%RTT-3-IPSLATHRESHOLD"
However I'm going to be running multiple SLAs and I want to send an email out for each one. When I try the following command it fails to match the syslog pattern and the emails doesn't get sent.
event syslog pattern "%RTT-3-IPSLATHRESHOLD: IP SLAs(1): Threshold exceeded for rtt"
May 4 12:28:28.155: %RTT-3-IPSLATHRESHOLD: IP SLAs(1): Threshold exceeded for rtt May 4 12:28:28.163: fh_fd_syslog_event_match: num_matches = 0 May 4 12:28:28.163: fh_fd_data_syslog: num_matches = 0
“Catalyst 8500 Series - Deep Dive”
This event will have place on Tuesday 17th, November 2020 at 10hrs PDT
The Catalyst 8500 Series Edge Platforms are built with the highly programmable, third-generation Cisco Quantum Flow Processor and designed for ...
“Catalyst 8000 Edge Platforms Family Overview”
This event will have place on Wednesday 4th, November 2020 at 10hrs PDT
Designed for an intent-based networks, the Cisco Catalyst 8000 Edge Platforms family offers best-in-class networking and security ...
I'm currently redistributing OSPF to BGP and setting a local pref on the routes. Currently this works fine and having no issues. ip prefix-list ospf-routes seq 10 permit 172.16.100.0/24
route-map ospf-bgp permit 10
match ip address prefix-list ...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...