04-23-2019 11:11 PM
Hi Guys,
I have this scenario in my project for IPTV multicast routing : Streamer(udp)----6509 core----2960 access---STB
I configured the core and edge switch to route the multicast and multicast udp IPs is working only within the IPTV vlan but I want to be able to get the udp multicast with different vlans? How can I achieve thi through configuration?
here is my core 6509 configuration:
ip multicast-routing
ip igmp immediate-leave group-list 15
ip igmp snooping tcn query solicit
ip igmp snooping querier address 10.60.120.1(iptv vlan)
ip igmp snooping querier
interface Vlan121
description "FOR IPTV VLAN"
ip address 10.60.120.1 255.255.252.0
ip pim sparse-dense-mode
in the 2960 access :
ip igmp snooping vlan 121 immediate-leave
any suggestion for my case, thanks for all
04-24-2019 12:24 AM
Hello,
have you enabled 'ip pim sparse-dense-mode' on the other layer 3 VLAN (SVI) interfaces where you want the multicast traffic to go to ?
04-24-2019 01:22 AM
@Georg Pauwen wrote:Hello,
have you enabled 'ip pim sparse-dense-mode' on the other layer 3 VLAN (SVI) interfaces where you want the multicast traffic to go to ?
yes I made it under my other vlan need to get the stream but didn't work!
04-24-2019 01:49 AM
Hello,
can you post the full configuration of the 6509 ? What do you have configured as RP ?
04-24-2019 02:24 AM
04-24-2019 05:02 AM
Any Idea please!
04-24-2019 05:27 AM
I created a loop back inter face to be as RP but didn't work!
interface Loopback1
ip address 1.1.1.1 255.255.255.255
ip pim sparse-dense-mode
end
ip pim rp-address 1.1.1.1 override
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide