01-07-2020 06:48 AM
Hi,
I have problem with upgrading IOS in Cisco IR829. I used image universal k9 version SPA 158-3 M2a bundle, router was shipped with older version (15.7). I run command
bundle install flash:ir800-universalk9-bundle.SPA.158-3.M2a.bin
Router was doing something and during upgrading Hypervisor image error appeared
No more space in bootstrap
Failed to install hypervisor image
I used same bundle image for upgrading some older routers (delivered in 2019) without any problem. So it is quite strange, that new router (made in November 2019) without any previous configuration has problem with free space.
Any ideas?
01-07-2020 08:43 AM
01-07-2020 02:42 PM
As I wrote, the router is new, just unpacked from the box. So I can't delete anything on the flash:
I understand, that install from usb drive can be a solution. But imagine upgrading later, after router is be placed somewhere far from office and physical access will not be easy, or takes much time. And if something worked and now not with the same type of router...
01-07-2020 01:29 PM
01-07-2020 02:45 PM
show version
Cisco IOS Software, ir800 Software (ir800-UNIVERSALK9-M), Version 15.7(3)M4b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 07-May-19 17:22 by prod_rel_team
ROM: Bootstrap program is IR800
TS2842 uptime is 8 hours, 22 minutes
System returned to ROM by CLI initiated reload at 14:17:51 UTC Tue Jan 7 2020
System restarted at 14:19:35 UTC Tue Jan 7 2020
System image file is "flash:ir800-universalk9-mz.SPA.157-3.M4b"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco IR829GW-LTE-GA-EK9 (revision 2.0) with 365568K/60416K bytes of memory.
Processor board ID FGL2347LEGF
Last reset from CLI initiated reload
FPGA version: 2.9.0
BIOS: version 24 Production
BIOS: date[YYYY/MM/DD] :[2019/4/17]
MCU Bootloader : 28
MCU Application: 33
2 Serial(sync/async) interfaces
7 Gigabit Ethernet interfaces
9 terminal lines
2 Cellular interfaces
1 cisco Embedded AP (s)
DRAM configuration is 72 bits wide with parity disabled.
256K bytes of non-volatile configuration memory.
976562K bytes of ATA System Flash (Read/Write)
250000K bytes of ATA Bootstrap Flash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*1 IR829GW-LTE-GA-EK9 FGL2347LEGF
Suite License Information for Module:'ir800'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
Technology Package License Information for Module:'ir800'
------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data datak9 Permanent datak9
Configuration register is 0x102
dir
Directory of flash:/
1 drw- 0 Nov 25 2019 07:57:42 +00:00 ORPHAN1
3 -rw- 35 Nov 25 2019 08:03:28 +00:00 pnp-tech-time
4 -rw- 54922 Nov 25 2019 08:03:38 +00:00 pnp-tech-discovery-summary
5 -rw- 64248873 Nov 25 2019 07:54:44 +00:00 ir800-universalk9-mz.SPA.157-3.M4b
6 -rw- 379 Nov 25 2019 07:58:26 +00:00 fscheck
7 drw- 0 Nov 23 2019 06:05:42 +00:00 managed
17 drw- 0 Nov 23 2019 06:05:44 +00:00 eem
18 -rw- 720 Jan 7 2020 14:05:46 +00:00 vlan.dat
19 -rw- 192838243 Jan 7 2020 12:29:18 +00:00 ir800-universalk9-bundle.SPA.158-3.M2a.bin
20 -rw- 75260452 Nov 23 2019 09:04:12 +00:00 gemboa.V6.1.4.efi.SSA
994918400 bytes total (662159360 bytes free)
01-07-2020 03:39 PM
01-09-2020 01:11 AM
I tried to download different image (version 15.9) and I have same issue. Fresh router with no configuration.
IR800#bundle install flash:ir800-universalk9-bundle.SPA.159-3.M.bin
Installing bundle image: /ir800-universalk9-bundle.SPA.159-3.M.bin.......................................................................................................................................................................
updating Hypervisor image...
Sending file modes: C0444 25177969 ir800-hv.srp.SPA.3.0.83
%Error copy from scp://*:*@127.1.3.1//vds_system/bundle/ir800-hv.srp.SPA.3.0.83 to bootstrap:ir800-hv.srp.SPA.3.0.83
No more space in bootstrap.
Failed to install hypervisor image!
IR800#dir flash:
Directory of flash:/
1 drw- 0 Nov 26 2019 04:49:24 +00:00 ORPHAN1
3 -rw- 35 Nov 26 2019 04:55:10 +00:00 pnp-tech-time
4 -rw- 54469 Nov 26 2019 04:55:20 +00:00 pnp-tech-discovery-summary
5 -rw- 64248873 Nov 26 2019 04:46:22 +00:00 ir800-universalk9-mz.SPA.157-3.M4b
6 -rw- 379 Nov 26 2019 04:50:04 +00:00 fscheck
7 drw- 0 Nov 23 2019 08:41:58 +00:00 managed
17 drw- 0 Nov 23 2019 08:42:00 +00:00 eem
19 -rw- 204194063 Jan 9 2020 08:15:50 +00:00 ir800-universalk9-bundle.SPA.159-3.M.bin
18 -rw- 75260452 Nov 26 2019 01:57:20 +00:00 gemboa.V6.1.4.efi.SSA
994918400 bytes total (650805248 bytes free)
IR800#sh run | i boot
boot-start-marker
boot-end-marker
service-module wlan-ap 0 bootimage autonomous
IR800#
01-09-2020 02:13 AM
01-09-2020 02:28 AM
Ok, so you want to upgrade to 15.9(3)M, right?
So do this:
conf t boot sytem flash flash:ir800-universalk9-bundle.SPA.159-3.M.bin end wr reboot
After the router boots 15.9(3)M try unpacking it.
01-09-2020 03:10 AM
Yes, at least 15.8 (some features we need). But this will not work.
ERROR Image name ... is invalid (Exec format error).
I will try to downgrade to 15.6 a then upgrade from this version (it should work). And report the bug.
02-10-2020 10:06 AM
Any update? experiencing the same behavior on IR829 fresh out of box
02-10-2020 11:23 PM
Yes, same behavior. Upgrade from 15.7 to 15.6 or 15.8 was not successful.
03-05-2020 07:39 AM
I found some ORPHAN hypervisors in bootstrap. Below steps worked for me.
1) Backup config
2) Force modem into ROMMON1 by unplugging and powering device on with reset button depressed. Release when POE light illuminates (~15sec). Ctrl+C or send Break just after boot.
3) dir to show bootstrap:
bootstrap:
4096 Nov 7 06:05 ORPHAN1
4096 Jan 28 18:51 ORPHAN2
24143729 Mar 4 20:42 ir800-hv.srp.SPA.3.0.42
4) Use “delete bootstrap:/ORPHAN1 + 2” to clean up un-used images
5) boot ir800-hv.srp.SPA.<ver>
6) bundle install flash:
06-16-2022 03:22 AM
Try this instead,
clear the bootstrap orphan thingy,
run this command :
test if show hidden
dir bootstrap:
delete /recursive /force bootstrap:ORPHAN1
once the bootstrap has enough space, then you can proceed with bundle installation.
Do take note, do not delete the hypervisor image.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide