09-18-2016 04:19 AM - last edited on 03-25-2019 03:47 PM by ciscomoderator
In the datasheet for ISR 4000 IP SLA is mentioned only in the AppX bundle.
Is IP SLA also available with the Security license or do we have to buy AppX to get it?
Regards.
09-18-2016 11:31 PM
you will need the AppX for all functionalities of IP SLA
have a look here
http://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/ISR-AX-Comprehensive-Ordering-Guide.html#_Toc351084728
HTH
Narayan
09-19-2016 01:10 AM
It says there that with appx you additionaly get IP SLAs LSP Health Monitor - (APP/DATA license only).
Do you perhaps know what it is used for?
Regards.
06-14-2021 05:21 AM
If some DC site/NOC team location router with APPx license will be used to monitor all other office routers and links then also all sites need Appx license? or only site router with NOC would require Appx license (IP SLA initiator) and rest would be acting as IP SLA responder?
The router used for monitoring and under monitoring will be 4k series.
02-25-2018 08:54 PM
For IPsla on c4000 series, You just Security feature license enabled, pls check show version License.
the command syntax is bit different due to XE ios, I just recently configured and it is working like charm.
track 1 ip sla 1 reachability
ip sla 1
icmp-echo xxx.xxx.xxx.xxx(destination) source-ip xxx.xxx.xxx.xxx(sourceIP)
frequency 15
ip sla schedule 1 life forever start-time now
pls mark this as closed if issue is resolved.
06-14-2021 05:29 AM
is Appx license required for both IP SLA responder and IP SLA initiator ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide