hi team, i am replacing the one of our customer Core router 7500 series to ASR 1006(IOS XE). in existing router ISDN link is terminated and no. of dialer interfaces created. please any one can help me out how to do the isdn configuration in ASR 1006. please find the below mention configuration for the existing core router.
controller E1 1/0/4
framing NO-CRC4
pri-group timeslots 1-31
!
interface Serial4/0/4:20
bandwidth 2048
no ip address
ip nat outside
encapsulation ppp
dialer pool-member 4 max-link 30
dialer pool-member 60
dialer pool-member 80 max-link 4
dialer pool-member 90 max-link 30
dialer pool-member 20
dialer pool-member 50 max-link 10
dialer pool-member 3
dialer pool-member 6
dialer pool-member 30 max-link 15
dialer pool-member 10
dialer pool-member 15
dialer pool-member 70
dialer pool-member 1
dialer pool-member 100
no snmp trap link-status
isdn switch-type *****
no cdp enable
ppp authentication chap
ppp multilink
!
interface Dialer1
ip address 192.168.210.110 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip route-cache cef
shutdown
dialer pool 1
dialer remote-name bangalorecore
dialer idle-timeout 999
dialer string *****
dialer caller *****
dialer load-threshold 250 outbound
dialer-group 1
no snmp trap link-status
no cdp enable
ppp authentication chap
!
interface Dialer2
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
no snmp trap link-status
no cdp enable
ppp authentication chap
!
